RUBIDIUM
| UN 编号 | UN1423 |
|---|---|
| 中文名称 | 铷 |
| 英文名称 | RUBIDIUM |
| 危险类别 | 第4.3类 |
| 包装类别 | I |
| 海洋污染物 | 原表未标注;须结合实际货物分类核对 |
| 有限数量 | 0 |
| 例外数量 | E0 |
| EmS 应急措施 | F-G, S-N |
银白色延展性的软金属。熔 点:39℃。飘浮于水。与潮 气、水或酸类发生反应放出氢 气,氢气可被反应所产生的热 点燃。有强烈的反应性,有时 有爆炸性。
Silvery-white, ductile, soft metal. Melting point: 39 C. Floats on ° water. Reacts violently with moisture, water or acids, evolving hydrogen, which may be ignited by the heat of the reaction. Highly reactive, sometimes with explosive effect.
出处:IMDG Code 42-24 第 631 页
当前条目 1 列明的包装导则: P403 ;有限数量 0,例外数量 E0。
P403 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: 组合包装最大净重玻璃 2kg 桶塑料 15kg 钢(1A1、1A2) 400kg 金属 20kg 铝(1B1、1B2) 400kg 其它金属(1N1、1N2) 400kg 内包装须密封(例如用胶塑料(1H1、1H2) 400kg 带或螺纹封盖) 胶合板(1D) 400kg 纤维质(1G) 400kg 箱钢(4A) 400kg 铝(4B) 400kg 其它金属(4N) 400kg 天然木(4C1) 250kg 天然木,箱壁防筛漏 250kg (4C2) 250kg 胶合板(4D) 125kg 再生木(4F) 125kg 纤维板(4G) 60kg 可发性塑料(4H1) 250kg 硬塑料(4H2) 罐钢(3A1、3A2) 120kg 铝(3B1、3B2) 120kg 塑料(3H1、3H2) 120kg 单一包装桶钢(1A1、1A2) 250kg 铝(1B1、1B2) 250kg 非钢或铝的金属(1N1、1N2) 250kg 塑料(1H1、1H2) 250kg P403 罐钢(3A1、3A2) 120kg 铝(3B1、3B2) 120kg 塑料(3H1、3H2) 120kg 复合包装装于钢桶或铝桶中的塑料容器(6HA1或6HB1) 250kg 装于纤维、塑料或胶合板桶中的塑料容器(6HG1、6HH1 75kg 或6HD1)装于钢、铝、木质、胶合板、纤维板、硬塑料 75kg 箱里的塑料容器(6HA2、6HB2、6HC、6HD2、6HG2或 6HH2) 符合第4.1.3.6条的一般规定的压力容器特殊包装规定: PP31 对于 UN 1360、1397、1402、1404、1407、1409、1410、1413、1414、1415、 1418、1419、1423、1426、1427、1428、1432、1433、1436、1714、1870、 2010、2011、2012、2013、2257、2463、2806、2813、3131、3132、3134、 3135、3208、3209、3395、3396、3397、3401、3402、3403 和 3404,包装须密封。 PP83 已删除
P403 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass Glass 2 kg Drums Plastic 15 kg steel (1A1, 1A2) 400 kg Metal 20 kg aluminium (1B1, 1B2) 400 kg other metal (1N1, 1N2) 400 kg Inner packagings shall be hermetically plastics (1H1, 1H2) 400 kg sealed (e.g. by taping or by threaded plywood (1D) 400 kg closures). fibre (1G) 400 kg Boxes steel (4A) 400 kg aluminium (4B) 400 kg other metal (4N) 400 kg natural wood (4C1) 250 kg natural wood with sift-proof walls 250 kg (4C2) plywood (4D) 250 kg reconstituted wood (4F) 125 kg fibreboard (4G) 125 kg expanded plastics (4H1) 60 kg solid plastics (4H2) 250 kg Jerricans steel (3A1, 3A2) 120 kg aluminium (3B1, 3B2) 120 kg plastics (3H1, 3H2) 120 kg Single packagings Drums steel (1A1, 1A2) 250 kg aluminium (1B1, 1B2) 250 kg metal other than steel or aluminium (1N1, 1N2) 250 kg plastics (1H1, 1H2) 250 kg Jerricans steel (3A1, 3A2) 120 kg aluminium (3B1, 3B2) 120 kg plastics (3H1, 3H2) 120 kg Composite packagings Plastics receptacle in steel or aluminium drum (6HA1 or 6HB1) 250 kg Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1 or 6HD1) 75 kg Plastics receptacle in steel, aluminium, wood, plywood, fibreboard or solid 75 kg plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Pressure receptacles, provided that the general provisions of 4.1.3.6 are met Special packing provisions: PP31 For UN Nos. 1360, 1397, 1402, 1404, 1407, 1409, 1410, 1413, 1414, 1415, 1418, 1419, 1423, 1426, 1427, 1428, 1432, 1433, 1436, 1714, 1870, 2010, 2011, 2012, 2013, 2257, 2463, 2806, 2813, 3131, 3132, 3134, 3135, 3208, 3209, 3395, 3396, 3397, 3401, 3402, 3403 and 3404, packagings shall be hermetically sealed. PP83 Deleted
所属导则:P403
核对英文原文页面与脚注 ↗ · 官方 PDF 202–202
对于 UN 1360、1397、1402、1404、1407、1409、1410、1413、1414、1415、 1418、1419、1423、1426、1427、1428、1432、1433、1436、1714、1870、 2010、2011、2012、2013、2257、2463、2806、2813、3131、3132、3134、 3135、3208、3209、3395、3396、3397、3401、3402、3403 和 3404,包装须密封。
For UN Nos. 1360, 1397, 1402, 1404, 1407, 1409, 1410, 1413, 1414, 1415, 1418, 1419, 1423, 1426, 1427, 1428, 1432, 1433, 1436, 1714, 1870, 2010, 2011, 2012, 2013, 2257, 2463, 2806, 2813, 3131, 3132, 3134, 3135, 3208, 3209, 3395, 3396, 3397, 3401, 3402, 3403 and 3404, packagings shall be hermetically sealed.
IBC04 只要符合第4.1.1、4.1.2和4.1.3节的一般规定,允许使用下列IBCs: 金属(11A、11B、11N、21A、21B、21N、31A、31B和31N) 特殊包装规定: B1 对于包装类 I 物质,IBCs 须装在封闭的货物运输组件或货运集装箱/货运车辆内运输, 且货物运输组件或货运集装箱/货运车辆须具有至少与 IBCs 高度相同的硬质侧壁或围栏。
IBC04 The following IBCs are authorized, provided the general provisions of 4.1.1, 4.1.2 and 4.1.3 are met: Metal (11A, 11B, 11N, 21A, 21B, 21N, 31A, 31B and 31N). Special packing provision: B1 For packing group I substances, IBCs shall be carried in closed cargo transport units or in freight containers/ vehicles, which shall have rigid sides or fences at least to the height of the IBC.
所属导则:IBC04
核对英文原文页面与脚注 ↗ · 官方 PDF 231–231
对于包装类 I 物质,IBCs 须装在封闭的货物运输组件或货运集装箱/货运车辆内运输, 且货物运输组件或货运集装箱/货运车辆须具有至少与 IBCs 高度相同的硬质侧壁或围栏。
For packing group I substances, IBCs shall be carried in closed cargo transport units or in freight containers/ vehicles, which shall have rigid sides or fences at least to the height of the IBC.
一览表未列明可移动罐柜 T 导则。其他适用条款仍须核对;BK 散装容器要求如有列明,会单独显示。
条目 1 的包件标签与标记预览。请结合实际货物分类及特殊规定核对。
4.3本条目在 IMDG Code 42-24 一览表中未列明特殊规定。
| 积载与操作 | 积载类D H1(Category D H1) |
|---|---|
| 隔离 | SG26 SG35 |
核对英文原文页面与脚注 ↗ · 官方 PDF 493–493
补充:当在集装箱船上舱面积载时,须在横向与第 2.1 类和第 3 类保持最小两个箱位,当在滚装船上积载时,须在横向与第 2.1 类和第 3 类保持最小6米。
In addition: from goods of classes 2.1 and 3 when stowed on deck of a containership a minimum distance of two container spaces athwartship shall be maintained, when stowed on ro-ro ships a distance of 6 m athwartship shall be maintained.
出口危险货物包装使用鉴定结果单(危包证)的办理逻辑,以及它和船级社证、钢瓶证、SOC 罐证分别在什么场景下用、向谁申请。
按IMDG42-24逐项核对DG申请表,区分规则必需内容和承运人补充字段,处理无包装组、条件性副危险和LQ等情况。
打开 UN1423 的交互查询,核对类别、包装与隔离要求。DG 表生成暂未开放使用。
打开规则查询 →