IMDGSEEK · 危险品海运查询 English 打开交互工作台 →

UN1928 溴化钾基镁的乙醚溶液

METHYLMAGNESIUM BROMIDE IN ETHYL ETHER

IMDG Code 42-24 第4.3类 包装类别 I 更新 2026-10-12

基本信息

UN 编号UN1928
中文名称溴化钾基镁的乙醚溶液
英文名称METHYLMAGNESIUM BROMIDE IN ETHYL ETHER
危险类别第4.3类(副危险 3)
包装类别I
海洋污染物原表未标注;须结合实际货物分类核对
有限数量0
例外数量E0
EmS 应急措施F-G, S-L

物质性质与外观

无色的、淡黄色液体。与水接 触会急剧分解。损漏会自燃。

Colourless, yellowish liquid. Decomposes violently in contact with water. Spillage will ignite spontaneously.

出处:IMDG Code 42-24 第 661 页

包装要求

当前条目 1 列明的包装导则: P402 ;有限数量 0,例外数量 E0。

P402

原文页面与交叉引用

核对英文原文页面与脚注 ↗ · 官方 PDF 201–201

P402 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: (1) 只要符合第 4.1.3.6 条一般规定的压力容器。压力容器须由钢制成,并在不低于 0.6MPa(6bar,表压)的压力下进行初次检验,并在以后每 10 年进行定期检验。运输过程中,液面须处于表压不低于20KPa(0.2bar)的惰性气体层下。 (2) 组合容器: 外容器: 桶(1A1、1A2、1B1、1B2、1N1、1N2、1H1、1H2、1D、1G); 箱(4A、4B、4N、4C1、4C2、4D、4F、4G、4H1、4H2); 罐(3A1、3A2、3B1、3B2、3H1、3H2)。 最大净质量如下的内容器: 玻璃 10 kg 金属或塑料 15 kg 每个内容器须装有螺纹封盖。 每个内容器须用惰性衬垫和吸收材料包裹,其数量足以吸收全部内装物。 每个外容器的最大净质量不超过125 kg。 (3) 钢桶(1A1),最大容积为250 L。 (4) 由钢桶或铝桶(6HA1 或 6HB1)中的塑料内容器组成的复合容器,最大容积为 250L。 特殊包装规定: PP31 对于UN 1389、1391、1392、1420、1421、1422、3148、3184(包装类II)、3185 (包装类 II)、3187(包装类 II)、3188(包装类 II)、3398(包装类 I)、3399(包装类I)和3482,包装须密封。

P402 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met: (1) Pressure receptacles, provided that the general provisions of 4.1.3.6 are met. They shall be made of steel and subjected to an initial test and periodic tests every 10 years at a pressure of not less than 0.6 MPa (6 bar, gauge pressure). During carriage, the liquid shall be under a layer of inert gas with a gauge pressure of not less than kPa (0.2 bar). (2) Combination packagings Outer packagings: Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); Jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2). Inner packagings with a maximum net mass as follows: Glass 10 kg Metal or plastics 15 kg Each inner packaging shall be fitted with threaded closures. Each inner packaging shall be surrounded by inert cushioning and absorbent material in a quantity sufficient to absorb the entire contents. The maximum net mass per outer packaging shall not exceed 125 kg. (3) Steel drums (1A1) with a maximum capacity of 250 L. (4) Composite packagings consisting of plastics receptacle in a steel or aluminium drum (6HA1 or 6HB1) with a maximum capacity of 250 L. Special packing provision: PP31 For UN Nos. 1389, 1391, 1392, 1420, 1421, 1422, 3148, 3184 (PG II), 3185 (PG II), 3187 (PG II), 3188 (PG II), 3398 (PG I), 3399 (PG I) and 3482, packagings shall be hermetically sealed.

中型散装容器(IBC)要求

一览表未列明本条目的 IBC 导则,请核对其他适用条款。

可移动罐柜运输要求

一览表未列明可移动罐柜 T 导则。其他适用条款仍须核对;BK 散装容器要求如有列明,会单独显示。

运输标签与标记

条目 1 的包件标签与标记预览。请结合实际货物分类及特殊规定核对。

遇水放出易燃气体 4.3 4.3
遇水放出易燃气体 4.3
易燃液体 3 3
易燃液体 3

特殊规定(Special Provisions)

本条目在 IMDG Code 42-24 一览表中未列明特殊规定。

积载与隔离

积载与操作积载类D H1(Category D H1)
隔离SG26

操作规定(H) · 当前条目 1

H1
原文页面与交叉引用

核对英文原文页面与脚注 ↗ · 官方 PDF 485–485

在合理可行的条件下尽量保持干燥。

Keep as dry as reasonably practicable.

隔离代码(7.2.8)

SG26
原文页面与交叉引用

核对英文原文页面与脚注 ↗ · 官方 PDF 493–493

补充:当在集装箱船上舱面积载时,须在横向与第 2.1 类和第 3 类保持最小两个箱位,当在滚装船上积载时,须在横向与第 2.1 类和第 3 类保持最小6米。

In addition: from goods of classes 2.1 and 3 when stowed on deck of a containership a minimum distance of two container spaces athwartship shall be maintained, when stowed on ro-ro ships a distance of 6 m athwartship shall be maintained.

同类其他 UN 号

延伸阅读

你正在查询 UN1928 · 溴化钾基镁的乙醚溶液

先核对这票货的运输要求

打开 UN1928 的交互查询,核对类别、包装与隔离要求。DG 表生成暂未开放使用。

打开规则查询 →
规则更新了?留个邮箱,43-26 上线时通知你