IMDGSEEK · 危险品海运查询 打开交互工作台 →

UN3139 氧化性液体,未另列明的

OXIDIZING LIQUID, N.O.S.

IMDG Code 42-24 第5.1类 包装类别 I 更新 2026-09-08

基本信息

UN 编号UN3139
中文名称氧化性液体,未另列明的
英文名称OXIDIZING LIQUID, N.O.S.
危险类别第5.1类
包装类别I
海洋污染物
有限数量0
例外数量E0
EmS 应急措施F-A,S-Q(F-A, S-Q)

本 UN 号下的各包装类别条目

包装类别类别有限数量例外数量包装导则罐柜导则
I 5.1 0 E0 P502
II 5.1 1 L E2 P504
III 5.1 5 L E1 P504

包装要求

本条目适用的包装导则: P502P504 ;有限数量 0,例外数量 E0。

P502

P502 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: 组合包装最大净重玻璃 5 L 桶金属 5 L 钢(1A1、1A2) 125kg 塑料 5 L 铝(1B1、1B2) 125kg 其他金属(1N1、1N2) 125kg 胶合板(1D) 125kg 纤维质(1G) 125kg 塑料(1H1、1H2) 125kg 箱钢(4A) 125kg 铝(4B) 125kg 其它金属(4N) 125kg 天然木(4C1) 125kg 天然木,箱壁防筛漏(4C2) 125kg 胶合板(4D) 125kg 再生木(4F) 125kg 纤维板(4G) 125kg 可发性塑料(4H1) 60kg 硬塑料(4H2) 125kg 单一包装最大容积桶钢(1A1) 250L 铝(1B1) 250L 塑料(1H1) 250L 罐钢(3A1) 60L 铝(3B1) 60L 塑料(3H1) 60L 复合包装装于钢或铝桶内的塑料容器(6HA1、6HB1) 250L P502 装于纤维、塑料或胶合板桶内的塑料容器(6HG1、6HH1、 250L 6HD1) 装于钢或铝板条箱或箱内的塑料容器或装于木质、胶合板、纤 60L 维板或硬塑料箱内的塑料容器(6HA2、6HB2、6HC、6HD2、 6HG2或6HH2) 装于钢、铝、纤维或胶合板桶内的玻璃容器(6PA1、6PB1、 60L 6PD1或6PG1),或装于钢、铝、木质或纤维板箱内或藤条筐内的玻璃容器(6PA2、6PB2、6PC、6PD2或6PG2)或装于硬质或泡沫塑料容器内的玻璃容器(6PH1或6PH2)。 特殊包装规定: PP28 对于UN 1873,包装直接与高氯酸接触的部件须由玻璃或塑料制成。

P502 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass Glass 5 L Drums Metal 5 L steel (1A1, 1A2) 125 kg Plastic 5 L aluminium (1B1, 1B2) 125 kg other metal (1N1, 1N2) 125 kg plywood (1D) 125 kg fibre (1G) 125 kg plastics (1H1, 1H2) kg Boxes steel (4A) 125 kg aluminium (4B) 125 kg other metal (4N) 125 kg natural wood (4C1) 125 kg natural wood with sift-proof 125 kg walls (4C2) plywood (4D) 125 kg reconstituted wood (4F) 125 kg fibreboard (4G) 125 kg expanded plastics (4H1) 60 kg solid plastics (4H2) 125 kg Single packagings Maximum capacity Drums steel (1A1) 250 L aluminium (1B1) 250 L plastics (1H1) 250 L Jerricans steel (3A1) 60 L aluminium (3B1) 60 L plastics (3H1) 60 L Composite packagings Plastics receptacle in steel or aluminium drum (6HA1, 6HB1) 250 L Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1, 6HD1) 250 L Plastics receptacle in steel or aluminium crate or box or plastics receptacle in 60 L wood, plywood, fibreboard or solid plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Glass receptacle in steel, aluminium, fibre or plywood drum (6PA1, 6PB1, 6PD1 or 60 L 6PG1) or in a steel, aluminium, wood or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG2 or 6PD2) or in expanded or solid plastics packaging (6PH1 or 6PH2) Special packing provision: PP28 For UN No. 1873, parts of packagings which are in direct contact with perchloric acid shall be constructed of glass or plastics.

出处:IMDG Code 42-24 第 213 页(4.1.4.1)

P504

P504 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: 组合包装最大净重 (1) 外包装:(1A1、1A2、1B1、1B2、1N1、1N2、1H1、1H2、1D、 75kg 1G、4A、4B、4N、4C1、4C2、4D、4F、4G、4H2) 内包装:最大容积为5L的玻璃容器。 (2) 外包装 :(1A1、1A2、1B1、1B2、1N1、N2、1H1、1H2、1D、 75kg 1G、4A、4B、4N、4C1、4C2、4D、4F、4G、4H2)。 内包装:最大容积为30L的塑料容器。 (3) 最大容积为40L的金属容器装于1G、4F或4G的外包装中。 125kg (4) 最大容积为 40L 的金属容器装于(1A1、1A2、1B2、1N1、1N2、 225kg 1H1、1H2、1D、4A、4B、4N、4C1、4C2、4D、4H2) 外包装中。 单一包装最大容积桶钢,不可拆卸桶顶(1A1) 250L 铝,不可拆卸桶顶(1B1) 250L 其它金属,不可拆卸桶顶(1N1) 250L 塑料,不可拆卸桶顶(1H1) 250L 罐钢,不可拆卸罐顶(3A1) 60L 铝,不可拆卸罐顶(3B1) 60L 塑料,不可拆卸罐顶(3H1) 60L 复合包装装于钢桶或铝桶中的塑料容器(6HA1、6HB1) 250L 装于纤维质、塑料或胶合板桶中的塑料容器(6HG1、6HH1、6HD1) 120L 装于钢或铝板条箱或箱内的塑料容器或装于木质、胶合板、纤维板或硬塑 60L 料箱内的塑料容器(6HA2、6HB2、6HC、6HD2、6HG2、6HH2,) 装于钢、铝、纤维质或胶合板桶内的玻璃容器(6PA1、6PB1、6PD1 或 60L 6PG1),或装于钢、铝、木质或纤维板箱内或藤条筐内的玻璃容器 (6PA2、6PB2、6PC、6PG2 或 6PD2),或装于硬质或泡沫塑料容器内的玻璃容器(6PH1或6PH2)。 特殊包装规定: PP10 对于UN 2014和3149,包装须有通风孔。 P504 PP31 对于UN 2626,包装须密封。

P504 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (1) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Glass receptacles with a maximum capacity of 5 L (2) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Plastics receptacles with a maximum capacity of 30 L (3) Outer packagings: (1G, 4F or 4G) 125 kg Inner packagings: Metal receptacles with a maximum capacity of 40 L (4) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 4A, 4B, 4N, 4C1, 4C2, 4D, 225 kg 4H2) Inner packagings: Metal receptacles with a maximum capacity of 40 L Single packagings Maximum capacity Drums steel, non-removable head (1A1) 250 L aluminium, non-removable head (1B1) 250 L metal, other than steel or aluminium, non-removable head (1N1) 250 L plastics, non-removable head (1H1) 250 L Jerricans steel, non-removable head (3A1) 60 L aluminium, non-removable head (3B1) 60 L plastics, non-removable head (3H1) 60 L Composite packagings Plastics receptacle in steel or aluminium drum (6HA1, 6HB1) 250 L Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1, 6HD1) 120 L Plastics receptacle in steel or aluminium crate or box or plastics receptacle in wood, 60 L plywood, fibreboard or solid plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Glass receptacle in steel, aluminium, fibre or plywood drum (6PA1, 6PB1, 6PD1 or 6PG1) 60 L or in a steel, aluminium, wood or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG2 or 6PD2) or in expanded or solid plastics packaging (6PH1 or 6PH2) Special packing provisions: PP10 For UN Nos. 2014 and 3149, the packaging shall be vented. PP31 For UN 2626, packagings shall be hermetically sealed.

出处:IMDG Code 42-24 第 214 页(4.1.4.1)

中型散装容器(IBC)要求

IBC02

IBC02 只要符合第4.1.1、4.1.2和4.1.3节的一般规定,允许使用下列IBCs: 金属(31A、31B和31N); 硬质塑料(31H1和31H2); 复合包装(31HZ1)。 特殊包装规定: B5 对于盛装UN 1791、2014、2984和3149的IBCs,须配备允许在运输过程中排气的装置。排气装置的入口须设在运输过程中IBC最大充装条件下的蒸气空间内。 B8 纯物质不得使用 IBCs 运输,因为已知该物质在 50°C蒸汽压超过 110kPa,在 55°C时蒸气压超过130kPa。 B15 对于硝酸含量超过 55%的UN 2031,硬质塑料 IBCs和复合IBCs的硬质塑料内容器的允许使用期限为生产日期起两年。 B16 对于UN3375,未经主管当局批准,不得使用31A和31N型的IBCs。 B20 对于包装类II的UN 1716、1717、1736、1737、1738、1742、1743、1755、1764、 1768、1776、1778、1782、1789、1790、1796、1826、1830、1832、2031、 2308、2353、2513、2584、2796和2817,IBCs须安装两个关闭装置。

IBC02 The following IBCs are authorized, provided the general provisions of 4.1.1, 4.1.2 and 4.1.3 are met: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Special packing provisions: B5 For UN Nos. 1791, 2014, 2984 and 3149, IBCs shall be provided with a device to allow venting during transport. The inlet to the venting device shall be sited in the vapour space of the IBC under maximum filling conditions during transport. B8 The pure form of this substance shall not be transported in IBCs since it is known to have a vapour pressure of more than 110 kPa at 50C or 130 kPa at 55C. ° ° B15 For UN 2031 with more than 55% nitric acid, the permitted use of rigid plastics IBCs and of rigid plastics inner receptacles of composite IBCs shall be two years from their date of manufacture. B16 For UN 3375, IBCs of type 31A and 31N are not allowed without competent authority approval. B20 For UN Nos. 1716, 1717, 1736, 1737, 1738, 1742, 1743, 1755, 1764, 1768, 1776, 1778, 1782, 1789, 1790, 1796, 1826, 1830, 1832, 2031, 2308, 2353, 2513, 2584, 2796 and 2817 coming under PG II, IBCs shall be fitted with two shut-off devices.

罐柜运输要求

本条目无罐柜运输要求(一览表罐柜导则栏为空)。

运输标签与标记

本货物包件应张贴以下标签与标记:

氧化剂 5.1 5.1
氧化剂 5.1

⚠ 海洋污染物(MP)须按本批货实际判定:本条目为未列明的泛指条目(N.O.S.),一览表第 4 栏未标 P 并不代表排除适用(2.10.2.4);按 2.10.2.5,如该批货特性符合第 2.9.3 节的海洋污染物标准,须作为海洋污染物运输并加贴 MP 标记。

特殊规定(Special Provisions)

本条目适用特殊规定: 274223

SP 274

运输单证和包装标记的正确运输名称须以技术名称作补充(见3.1.2.8.1)。 ■ 仅就UN 3077和UN 3082而言,技术名称可以是《危险货物一览表》第2栏中以大写字母显示的名称,条件是该名称不包括“N.O.S.”,且未指定特别规定274。 须使用最恰当地描述该物质或混合物的名称,例如: ■ UN 3082,环境有害物质,液体,未另列明(涂料) ■ UN 3082,环境有害物质,液体,未另列明(香水产品)。

For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include “N.O.S.” and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).

出处:IMDG Code 42-24 第 773 页

SP 223

如果在测试时物质所表现的化学或物理特性不满足第3栏中所列类别或任何其他类别已建立的定义标准,除了2.10.3适用的海洋污染物以外,则不适用本《规则》的规定。

If the chemical or physical properties of a substance covered by this description are such that, when tested, it does not meet the established defining criteria for the class or division listed in column 3, or any other class or division, it is not subject to the provisions of this Code except in the case of a marine pollutant where 2.10.3 applies.

出处:IMDG Code 42-24 第 770 页

积载与隔离

积载与操作积载类D(Category D)
隔离SG38 SG49 SG60

隔离代码(7.2.8)

SG38

与SGG2 - 铵化合物“隔离”。

Stow “separated from” SGG2 – ammonium compounds.

SG49

与SGG8 - 氰化物“隔离”。

Stow “separated from” SGG6 – cyanides.

SG60

与SGG16 - 过氧化物“隔离”。

Stow “separated from” SGG16 – peroxides.

同类其他 UN 号

延伸阅读

你正在查询 UN3139 · 氧化性液体,未另列明的

要出这票货?直接生成 DG 申报资料

按 UN3139 自动带出类别、包装组、隔离要求与危包证清单,省掉翻书对表的时间。

生成 DG 申报资料 →
规则更新了?留个邮箱,43-26 上线时通知你