FLAMMABLE SOLID, ORGANIC, MOLTEN, N.O.S.
请按货物的正式运输名称、浓度或形态及包装类别选择。下方要求和标签预览均对应当前条目。
首次打开默认展示一条参考记录,不代表已替你完成货物归类。“—”表示原表该栏未列明。
| UN 编号 | UN3176 |
|---|---|
| 中文名称 | 易燃固体,有机的,熔融的,未另列明的 |
| 英文名称 | FLAMMABLE SOLID, ORGANIC, MOLTEN, N.O.S. |
| 危险类别 | 第4.1类 |
| 包装类别 | III |
| 海洋污染物 | 原表未标注;须结合实际货物分类核对 |
| 有限数量 | 0 |
| 例外数量 | E0 |
| EmS 应急措施 | F-A, S-H |
下表用于对比;展开的规则正文和标签只对应当前查看的条目 2。
| 包装类别 | 类别 | 有限数量 | 例外数量 | 包装导则 | 罐柜导则 |
|---|---|---|---|---|---|
| II | 4.1 | 0 | E0 | — | T3 |
| III | 4.1 | 0 | E0 | — | T1 |
见上条。
See entry above.
出处:IMDG Code 42-24 第 729 页
本条目在一览表中未列明包装导则。
一览表未列明本条目的 IBC 导则,请核对其他适用条款。
核对英文原文页面与脚注 ↗ · 官方 PDF 260–267
本可移动罐柜导则适用于第 1 类和第 3 至 9 类液体和固体物质,须满足第 4.2.1 节的一般规 定和第 6.7.2 节的要求。带 FRP 外壳的可移动罐柜导则适用于第 1、3、5.1、6.1、6.2、8 和 9 类或小类物质。此外,第 6.10 章的规定适用于带 FRP 外壳的可移动罐柜。
| 可移动罐柜导则 | 最低试验压力(bar) | 最小罐壳厚度(单位:mm–标准钢)(见第6.7.2.4条) | 安全减压规定 a(见第6.7.2.8条) | 底部开口规定 b(见第6.7.2.6条) |
|---|---|---|---|---|
| T1 | 1.5 | 见 6.7.2.4.2 | 正常 | 见 6.7.2.6.2 |
a 当标明“正常”时,除第 6.7.2.8.3 条外,第 6.7.2.8 条的所有规定均适用。 b 当此栏标明“不允许”时,当运输的物质为液体时,不允许底部开口(见第 6.7.2.6.1 条)。 当运输的物质在正常运输条件下遇到的所有温度下均为固体时,允许符合第 6.7.2.6.2 条规定 的底部开口。
来源 PDF 页码:371, 372 · 42-24
T1-T22 本可移动罐柜导则适用于第1类和第3至9类液体和固体物质,须满足第4.2.1节的一般规定和第6.7.2节的要求。带 FRP 外壳的可移动罐柜导则适用于第 1、3、5.1、6.1、6.2、8 和 9 类或小类物质。此外,第 6.10 章的规定适用于带 FRP 外壳的可移动罐柜。 最小罐壳厚度底部开口最低试验 (单位: mm-标准安全减压规定a 规定b 可移动罐柜导则压力钢) (见第6.7.2.8 (见第6.7.2.6 (bar) (见第6.7.2.4 条) 条) 条) 1.5 见6.7.2.4.2 正常见6.7.2.6.2
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 1.5 See 6.7.2.4.2 Normal See 6.7.2.6.2
对于在熔点以上运输的固体和高温液体,最大充灌度(单位为%)须按照第4.2.1.9.5条确定。
The maximum degree of filling (in%) for solids transported above their melting points and for elevated temperature liquids shall be determined in accordance with 4.2.1.9.5.
核对英文原文页面与脚注 ↗ · 官方 PDF 267–269
在加热条件下运输时,加热装置须安装在罐体外部。对于 UN 3176,此规定仅适用于物质与水发生危险反应的情况。
When transported under heated conditions, the heating device shall be fitted outside the shell. For UN 3176, this provision only applies when the substance reacts dangerously with water.
条目 2 的包件标签与标记预览。请结合实际货物分类及特殊规定核对。
4.1⚠ 海洋污染物(MP)须按本批货实际判定:本条目为未列明的泛指条目(N.O.S.),一览表第 4 栏未标 P 并不代表排除适用(2.10.2.4);按 2.10.2.5,如该批货特性符合第 2.9.3 节的海洋污染物标准,须作为海洋污染物运输并加贴 MP 标记。
当前条目 2 列明的特殊规定: 223、274。
如果在测试时物质所表现的化学或物理特性不满足第3栏中所列类别或任何其他类别已建立的定义标准,除了2.10.3适用的海洋污染物以外,则不适用本《规则》的规定。
If the chemical or physical properties of a substance covered by this description are such that, when tested, it does not meet the established defining criteria for the class or division listed in column 3, or any other class or division, it is not subject to the provisions of this Code except in the case of a marine pollutant where 2.10.3 applies.
运输单证和包装标记的正确运输名称须以技术名称作补充(见3.1.2.8.1)。 ■ 仅就UN 3077和UN 3082而言,技术名称可以是《危险货物一览表》第2栏中以大写字母显示的名称,条件是该名称不包括“N.O.S.”,且未指定特别规定274。 须使用最恰当地描述该物质或混合物的名称,例如: ■ UN 3082,环境有害物质,液体,未另列明(涂料) ■ UN 3082,环境有害物质,液体,未另列明(香水产品)。
For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include “N.O.S.” and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).
| 积载与操作 | 积载类C(Category C) |
|---|---|
| 隔离 | 一览表未列明隔离要求 |
出口危险货物包装使用鉴定结果单(危包证)的办理逻辑,以及它和船级社证、钢瓶证、SOC 罐证分别在什么场景下用、向谁申请。
按IMDG42-24逐项核对DG申请表,区分规则必需内容和承运人补充字段,处理无包装组、条件性副危险和LQ等情况。
打开 UN3176 的交互查询,核对类别、包装与隔离要求。DG 表生成暂未开放使用。
打开规则查询 →