IMDG Code 42-24 · Dangerous Goods List

UN0444CHARGES, EXPLOSIVE, COMMERCIAL without detonator

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class1.4D

Packing groupNot assigned in this entry

EmSF-B, S-X

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1

CHARGES, EXPLOSIVE, COMMERCIAL without detonator

Class: 1.4D
Subsidiary risk / reference: Not listed
Packing group: Not assigned in this entry
Marine pollutant entry: Not listed; check the cargo classification
Limited quantities: 0
Excepted quantities: E0
Packing instruction: P137
Special provisions: Not listed
Special packing provision: Not listed
IBC instruction: Not listed
IBC special provisions: Not listed
Portable tank / bulk container codes: Not listed
Tank special provisions: Not listed
EmS: F-B, S-X
Stowage and handling: Category 02 SW1 Category 02 SW1
Segregation: Not listed in this DGL field

Properties and observations · source text

See glossary of terms in appendix B.

Packing and large packaging instructions

P137

Source pages and references

Referenced provisions:4.1.1 ↗4.1.3 ↗4.1.5 ↗5.2.1.7.1 ↗

Check original English pages and footnotes ↗ · official PDF 181–181

P137 The following packagings are authorized, provided the general packing provisions of 4.1.1, 4.1.3 and special packing provisions of 4.1.5 are met. Inner packagings Intermediate packagings Outer packagings Bags Boxes plastics Not necessary steel (4A) aluminium (4B) Boxes other metal (4N) fibreboard natural wood, ordinary (4C1) wood natural wood, sift-proof walls (4C2) plywood (4D) Tubes reconstituted wood (4F) fibreboard fibreboard (4G) metal plastics, solid (4H2) plastics Drums Dividing partitions in the outer steel (1A1, 1A2) packagings aluminium (1B1, 1B2) other metal (1N1, 1N2) plywood (1D) fibre (1G) plastics (1H1, 1H2) Special packing provision: PP70 For UN Nos. 0059, 0439, 0440 and 0441, when the shaped charges are packed singly, the conical cavity shall face downwards and the package shall be marked as illustrated in figures in 5.2.1.7.1. When the shaped charges are packed in pairs, the conical cavities shall face inwards to minimize the jetting effect in the event of accidental initiation.

IMDG Code 42-24 · English source text

Stowage and handling codes

SW1

Source pages and references

Check original English pages and footnotes ↗ · official PDF 484–484

Protected from sources of heat.