UN1493SILVER NITRATE

(SOLIDS) P002 The following packagings are authorized provided the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (see 4.1.3.3) Glass 10 kg Drums Plastics1 30 kg steel (1A1, 1A2) 125 kg 400 kg 400 kg Metal 40 kg aluminium (1B1, 1B2) 125 kg 400 kg 400 kg Paper 1, 2, 3 50 kg other metal (1N1, 1N2) 125 kg 400 kg 400 kg Fibre1, 2, 3 50 kg plastics (1H1, 1H2) 125 kg 400 kg 400 kg plywood (1D) 125 kg 400 kg 400 kg fibre (1G) 125 kg 400 kg 400 kg Boxes steel (4A) 125 kg 400 kg 400 kg aluminium (4B) 125 kg 400 kg 400 kg other metal (4N) 125 kg 400 kg 400 kg natural wood (4C1) 125 kg 400 kg 400 kg natural wood with 250 kg 400 kg 400 kg sift-proof walls (4C2) plywood (4D) 125 kg 400 kg 400 kg These inner packagings shall reconstituted wood (4F) 125 kg 400 kg 400 kg be sift-proof. fibreboard (4G) 75 kg 400 kg 400 kg These inner packagings expanded plastics (4H1) 40 kg 60 kg 60 kg shall not be used when the substances being transported solid plastics (4H2) 125 kg 400 kg 400 kg may become liquid during Jerricans transport (see 4.1.3.4). Paper and fibre inner steel (3A1, 3A2) 75 kg 120 kg 120 kg packagings shall not be used aluminium (3B1, 3B2) 75 kg 120 kg 120 kg for substances of packing group I. plastics (3H1, 3H2) 75 kg 120 kg 120 kg Single packagings Drums steel (1A1 or 1A24) 400 kg 400 kg 400 kg aluminium (1B1 or 1B24) 400 kg 400 kg 400 kg metal, other than steel or aluminium (1N1 or 1N24) 400 kg 400 kg 400 kg plastics (1H1 or 1H24) 400 kg 400 kg 400 kg fibre (1G5) 400 kg 400 kg 400 kg plywood (1D5) 400 kg 400 kg 400 kg These packagings shall not be used for substances of packing group I that may become liquid during transport (see 4.1.3.4). These packagings shall not be used when the substances being transported may become liquid during transport (see 4.1.3.4). (SOLIDS) (continued) P002 The following packagings are authorized provided the general provisions of 4.1.1 and 4.1.3 are met. Maximum net mass (see 4.1.3.3) Single packagings (continued) Packing group I Packing group II Packing group III Jerricans steel (3A1 or 3A24) 120 kg 120 kg 120 kg aluminium (3B1 or 3B24) 120 kg 120 kg 120 kg plastics (3H1 or 3H24) 120 kg 120 kg 120 kg Boxes steel (4A)5 Not allowed 400 kg 400 kg aluminium (4B)5 Not allowed 400 kg 400 kg other metal (4N)5 Not allowed 400 kg 400 kg natural wood (4C1)5 Not allowed 400 kg 400 kg natural wood with sift-proof walls (4C2)5 Not allowed 400 kg 400 kg plywood (4D)5 Not allowed 400 kg 400 kg reconstituted wood (4F)5 Not allowed 400 kg 400 kg fibreboard (4G)5 Not allowed 400 kg 400 kg solid plastics (4H2)5 Not allowed 400 kg 400 kg Bags bags (5H3, 5H4, 5L3, 5M2)5 Not allowed 50 kg 50 kg Composite packagings Plastics receptacle in steel, aluminium, plywood, fibre or 400 kg 400 kg 400 kg plastics drum (6HA1, 6HB1, 6HG15, 6HD15, or 6HH1) Plastics receptacle in steel or aluminium crate or box, 75 kg 75 kg 75 kg wooden box, plywood box, fibreboard box or solid plastics box (6HA2, 6HB2, 6HC, 6HD25, 6HG25 or 6HH2) Glass receptacle in steel, aluminium, plywood or fibre 75 kg 75 kg 75 kg drum (6PA1, 6PB1, 6PD15 or 6PG15) or in steel, aluminium, wood, or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG25 or 6PD25) or in expanded or solid plastics packaging (6PH2 or 6PH15) 4 These packagings shall not be used for substances of packing group I that may become liquid during transport (see 4.1.3.4). These packagings shall not be used when the substances being transported may become liquid during transport (see 4.1.3.4). Pressure receptacles, provided that the general provisions of 4.1.3.6 are met. Special packing provisions: PP7 For UN 2000, celluloid may be transported unpacked on pallets, wrapped in plastic film and secured by appropriate means, such as steel bands, as a single commodity in closed cargo transport units. Each pallet shall not exceed 1,000 kg. PP8 For UN 2002, packagings shall be so constructed that explosion is not possible by reason of increased internal pressure. Gas cylinders and gas receptacles shall not be used for these substances. PP9 For UN Nos. 3175, 3243 and 3244, packagings shall conform to a design type that has passed a leakproofness test at the packing group II performance level. For UN 3175 the leakproofness test is not required when the liquids are fully absorbed in solid material contained in sealed bags. PP11 For UN 1309, packing group III, and UN 1362, 5H1, 5L1 and 5M1 bags are allowed if they are overpacked in plastic bags and are wrapped in shrink or stretch wrap on pallets. PP12 For UN Nos. 2213 and 3077, 5H1, 5L1 and 5M1 bags are allowed when transported in closed cargo transport units. PP13 For articles classified under UN 2870, only combination packagings meeting the packing group I performance level are authorized. PP14 For UN Nos. 2211, 2698 and 3314, packagings are not required to meet the performance tests in chapter 6.1. PP15 For UN Nos. 1324 and 2623, packagings shall meet the packing group III performance level. PP20 For UN 2217, any sift-proof, tearproof receptacle may be used. PP30 For UN 2471, paper or fibre inner packagings are not permitted. PP31 For UN Nos. 1362, 1463, 1565, 1575, 1626, 1680, 1689, 1698, 1868, 1889, 1932, 2471, 2545, 2546, 2881, 3048, 3088, 3170, 3174, 3181, 3182, 3189, 3190, 3205, 3206, 3341, 3342, 3448, 3449 and 3450, packagings shall be hermetically sealed. PP34 For UN 2969 (as whole beans), 5H1, 5L1 and 5M1 bags are permitted. PP37 For UN Nos. 2590 and 2212, 5M1 bags are permitted. All bags of any type shall be transported in closed cargo transport units or be placed in closed rigid overpacks. PP38 For UN 1309, bags are permitted only in closed cargo transport units or as unit loads. PP84 For UN 1057, rigid outer packagings meeting the packing group II performance level shall be used. The packagings shall be designed and constructed and arranged to prevent movement, inadvertent ignition of the devices or inadvertent release of flammable gas or liquid. PP85 For UN Nos. 1748, 2208, 2880, 3485, 3486 and 3487, bags are not allowed. PP92 For UN Nos. 3531 and 3533, packagings shall be designed and constructed to permit the release of gas or vapour to prevent a build-up of pressure that could rupture the packagings in the event of loss of stabilization. PP100 For UN numbers 1309, 1323, 1333, 1376, 1435, 1449, 1457, 1472, 1476, 1483, 1509, 1516, 1567, 1869, 2210, 2858, 2878, 2968, 3089, 3096 and 3125, flexible, fibreboard or wooden packagings shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner.

S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 2.65 See 6.7.2.4.2 Normal See 6.7.2.6.2