IMDG Code 42-24 · Dangerous Goods List

UN1600DINITROTOLUENES, MOLTEN

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class6.1

Packing groupII

EmSF-A, S-A

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1 · Packing group II

DINITROTOLUENES, MOLTEN

Class: 6.1
Subsidiary risk / reference: Not listed
Packing group: II
Marine pollutant entry: P
Limited quantities: 0
Excepted quantities: E0
Packing instruction: Not listed
Special provisions: Not listed
Special packing provision: Not listed
IBC instruction: Not listed
IBC special provisions: Not listed
Portable tank / bulk container codes: T7
Tank special provisions: TP3
EmS: F-A, S-A
Stowage and handling: Category C Category C
Segregation: Not listed in this DGL field

Properties and observations · source text

Molten liquid. This entry covers the 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-isomers having melting points between 52 C and 93 C. ° ° Toxic if swallowed, by skin contact or by inhalation.

Portable tank instructions

T7

Source pages and references

Referenced provisions:4.2.1 ↗6.7.2 ↗6.7.2.8 ↗6.7.2.6 ↗6.7.2.4 ↗6.7.2.4.2 ↗6.7.2.6.3 ↗

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T7 · Selected instruction · IMDG 42-24
Portable tank instruction	Minimum test pressure (bar)	Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)	Pressure relief provisionsa (see 6.7.2.8)	Bottom opening provisionsb (see 6.7.2.6)
T7	4	See 6.7.2.4.2	Normal	See 6.7.2.6.3

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages：264 · 42-24

Extracted source text

S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 4 See 6.7.2.4.2 Normal See 6.7.2.6.3

IMDG Code 42-24 · English source text

Tank special provisions

TP3

Source pages and references

Referenced provisions:4.2.1.9.5 ↗

Check original English pages and footnotes ↗ · official PDF 267–267

The maximum degree of filling (in%) for solids transported above their melting points and for elevated temperature liquids shall be determined in accordance with 4.2.1.9.5.