IMDGSEEKDangerous goods at sea

IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN2015HYDROGEN PEROXIDE, STABILIZED or HYDROGEN PEROXIDE, AQUEOUS SOLUTION, STABILIZED with more than 60% hydrogen peroxide

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class5.1
Packing groupI
EmSF-H, S-Q

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1 · Packing group I

HYDROGEN PEROXIDE, STABILIZED or HYDROGEN PEROXIDE, AQUEOUS SOLUTION, STABILIZED with more than 60% hydrogen peroxide

Class
5.1
Subsidiary risk / reference
8
Packing group
I
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P501
Special provisions
Not listed
Special packing provision
Not listed
IBC instruction
Not listed
IBC special provisions
Not listed
Portable tank / bulk container codes
T9
Tank special provisions
TP2 TP6 TP24
EmS
F-H, S-Q
Stowage and handling
Category D SW1 Category D SW1
Segregation
SGG16 SG16 SG59
Properties and observations · source text
Colourless liquid. Slowly decomposes, evolving oxygen; the rate of decomposition increases in contact with metals, except aluminium. Decomposes vigorously in contact with permanganates. When involved in a fire, mixtures with combustible material may be explosive. Causes burns to skin, eyes and mucous membranes. Even though stabilized, these solutions may evolve oxygen.

Packing and large packaging instructions

P501

Source pages and references
Referenced provisions:4.1.1 ↗4.1.3 ↗

Check original English pages and footnotes ↗ · official PDF 208–208

P501 This instruction applies to UN 2015. The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings maximum capacity maximum net mass Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4H2) or 5 L 125 kg drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D) or jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2) with glass, plastics or metal inner packagings Fibreboard box (4G) or fibre drum (1G), with 2 L 50 kg plastics or metal inner packagings each in a plastics bag Single packagings Maximum capacity Drums steel (1A1) 250 L aluminium (1B1) 250 L metal other than steel or aluminium (1N1) 250 L plastics (1H1) 250 L Jerricans steel (3A1) 60 L aluminium (3B1) 60 L plastics (3H1) 60 L Composite packagings Plastics receptacle in steel or aluminium drum (6HA1, 6HB1) 250 L Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1, 6HD1) 250 L Plastics receptacle in steel or aluminium crate or box or plastics receptacle 60 L in wood, plywood, fibreboard or solid plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) 4 Glass receptacle in steel, aluminium, fibre or plywood drum (6PA1, 6PB1, 6PD1 or 60 L 6PG1) or in a steel, aluminium, wood or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG2 or 6PD2) or in expanded or solid plastics packaging (6PH1 or 6PH2) Additional provisions: Packagings shall have a minimum ullage of 10%. Packagings shall be vented.

IMDG Code 42-24 · English source text

Portable tank instructions

T9

Source pages and references
Referenced provisions:4.2.1 ↗6.7.2 ↗6.7.2.8 ↗6.7.2.6 ↗6.7.2.4 ↗

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T9 · Selected instruction · IMDG 42-24
Portable tank instructionMinimum test pressure (bar)Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)Pressure relief provisionsa (see 6.7.2.8)Bottom opening provisionsb (see 6.7.2.6)
T946 mmNormalNot allowed

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages：264 · 42-24

Extracted source text
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 4 6 mm Normal Not allowed

IMDG Code 42-24 · English source text

Tank special provisions

TP6

Source pages and references

Check original English pages and footnotes ↗ · official PDF 268–268

To prevent the tank bursting in any event, including fire engulfment, it shall be provided with pressure- relief devices which are adequate in relation to the capacity of the tank and to the nature of the substance transported. The device shall also be compatible with the substance.

IMDG Code 42-24 · English source text

TP24

Source pages and references

Check original English pages and footnotes ↗ · official PDF 268–268

The portable tank may be fitted with a device located, under maximum filling conditions, in the vapour space of the shell to prevent the build-up of excess pressure due to the slow decom position of the substance transported. This device shall also prevent an unacceptable amount of leakage of liquid in the case of overturning or entry of foreign matter into the tank. This device shall be approved by the competent authority or its authorized body.

IMDG Code 42-24 · English source text

Stowage and handling codes

Segregation groups

Segregation codes

Labels and marks

Reference preview for Entry 1 · Packing group I. Confirm the cargo classification and any conditions in the special provisions.

Oxidizer 5.1
Oxidizer 5.1
Corrosive 8
Corrosive 8

Explore this class