IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN3139OXIDIZING LIQUID, N.O.S.

English proper shipping name · 3 DGL entries — select the applicable conditions below.

Choose the applicable DGL entry

Viewing entry 3

Match the proper shipping name, concentration or form, and packing group to your cargo. All requirements and the label preview below follow the selected entry.

The initial selection is a reference entry, not a classification decision for your cargo. “—” means the source field is not listed.

Class5.1
Packing groupIII
EmSF-A, S-Q

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 3.

Compare all 3 DGL entries

Entry 1 · Packing group I

OXIDIZING LIQUID, N.O.S.

Class
5.1
Subsidiary risk / reference
Not listed
Packing group
I
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P502
Special provisions
274
Special packing provision
Not listed
IBC instruction
Not listed
IBC special provisions
Not listed
Portable tank / bulk container codes
Not listed
Tank special provisions
Not listed
EmS
F-A, S-Q
Stowage and handling
Category D Category D
Segregation
SG38 SG49 SG60

Entry 2 · Packing group II

OXIDIZING LIQUID, N.O.S.

Class
5.1
Subsidiary risk / reference
Not listed
Packing group
II
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
1 L
Excepted quantities
E2
Packing instruction
P504
Special provisions
274
Special packing provision
Not listed
IBC instruction
IBC02
IBC special provisions
Not listed
Portable tank / bulk container codes
Not listed
Tank special provisions
Not listed
EmS
F-A, S-Q
Stowage and handling
Category B Category B
Segregation
SG38 SG49 SG60

Entry 3 · Packing group III

OXIDIZING LIQUID, N.O.S.

Class
5.1
Subsidiary risk / reference
Not listed
Packing group
III
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
5 L
Excepted quantities
E1
Packing instruction
P504
Special provisions
223 274
Special packing provision
Not listed
IBC instruction
IBC02
IBC special provisions
Not listed
Portable tank / bulk container codes
Not listed
Tank special provisions
Not listed
EmS
F-A, S-Q
Stowage and handling
Category B Category B
Segregation
SG38 SG49 SG60

Packing and large packaging instructions

P504

Source pages and references

Check original English pages and footnotes ↗ · official PDF 210–210

P504 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (1) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Glass receptacles with a maximum capacity of 5 L (2) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Plastics receptacles with a maximum capacity of 30 L (3) Outer packagings: (1G, 4F or 4G) 125 kg Inner packagings: Metal receptacles with a maximum capacity of 40 L (4) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 4A, 4B, 4N, 4C1, 4C2, 4D, 225 kg 4H2) Inner packagings: Metal receptacles with a maximum capacity of 40 L Single packagings Maximum capacity Drums steel, non-removable head (1A1) 250 L aluminium, non-removable head (1B1) 250 L metal, other than steel or aluminium, non-removable head (1N1) 250 L plastics, non-removable head (1H1) 250 L Jerricans steel, non-removable head (3A1) 60 L aluminium, non-removable head (3B1) 60 L plastics, non-removable head (3H1) 60 L Composite packagings Plastics receptacle in steel or aluminium drum (6HA1, 6HB1) 250 L Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1, 6HD1) 120 L Plastics receptacle in steel or aluminium crate or box or plastics receptacle in wood, 60 L plywood, fibreboard or solid plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Glass receptacle in steel, aluminium, fibre or plywood drum (6PA1, 6PB1, 6PD1 or 6PG1) 60 L or in a steel, aluminium, wood or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG2 or 6PD2) or in expanded or solid plastics packaging (6PH1 or 6PH2) Special packing provisions: PP10 For UN Nos. 2014 and 3149, the packaging shall be vented. PP31 For UN 2626, packagings shall be hermetically sealed.

IMDG Code 42-24 · English source text

IBC instructions

IBC02

Source pages and references

Check original English pages and footnotes ↗ · official PDF 231–231

IBC02 The following IBCs are authorized, provided the general provisions of 4.1.1, 4.1.2 and 4.1.3 are met: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Special packing provisions: B5 For UN Nos. 1791, 2014, 2984 and 3149, IBCs shall be provided with a device to allow venting during transport. The inlet to the venting device shall be sited in the vapour space of the IBC under maximum filling conditions during transport. B8 The pure form of this substance shall not be transported in IBCs since it is known to have a vapour pressure of more than 110 kPa at 50C or 130 kPa at 55C. ° ° B15 For UN 2031 with more than 55% nitric acid, the permitted use of rigid plastics IBCs and of rigid plastics inner receptacles of composite IBCs shall be two years from their date of manufacture. B16 For UN 3375, IBCs of type 31A and 31N are not allowed without competent authority approval. B20 For UN Nos. 1716, 1717, 1736, 1737, 1738, 1742, 1743, 1755, 1764, 1768, 1776, 1778, 1782, 1789, 1790, 1796, 1826, 1830, 1832, 2031, 2308, 2353, 2513, 2584, 2796 and 2817 coming under PG II, IBCs shall be fitted with two shut-off devices.

IMDG Code 42-24 · English source text

Special provisions

SP 223

Source pages and references

Check original English pages and footnotes ↗ · official PDF 758–758

If the chemical or physical properties of a substance covered by this description are such that, when tested, it does not meet the established defining criteria for the class or division listed in column 3, or any other class or division, it is not subject to the provisions of this Code except in the case of a marine pollutant where 2.10.3 applies.

IMDG Code 42-24 · English source text

SP 274

Source pages and references

Check original English pages and footnotes ↗ · official PDF 761–761

For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include “N.O.S.” and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).

IMDG Code 42-24 · English source text

Segregation codes

Labels and marks

Reference preview for Entry 3 · Packing group III. Other entries may have different subsidiary risks or quantity limits; check their individual fields above. Confirm the cargo classification and any conditions in the special provisions.

Oxidizer 5.1
Oxidizer 5.1

⚠ The marine pollutant (MP) status must be determined from the actual consignment: this is a generic N.O.S. entry, and no "P" in column 4 of the Index does not exclude applicability (2.10.2.4). Per 2.10.2.5, if the consignment meets the marine pollutant criteria of 2.9.3 it must be carried as a marine pollutant with the MP mark.

This UN may be carried as a limited quantity (Code allocation 5 L); if this consignment is shipped as LQ, the LQ mark must be applied and chapter 3.4 complied with

This UN may be carried as an excepted quantity (code E1); if this consignment is shipped as EQ, the EQ mark must be applied and chapter 3.5 complied with

Explore this class