IMDGSEEKDangerous goods at sea

IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN3362CHLOROSILANES, TOXIC, CORROSIVE, FLAMMABLE, N.O.S.

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class6.1
Packing groupII
EmSF-E, S-C

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1 · Packing group II

CHLOROSILANES, TOXIC, CORROSIVE, FLAMMABLE, N.O.S.

Class
6.1
Subsidiary risk / reference
3 / 8
Packing group
II
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P010
Special provisions
274
Special packing provision
Not listed
IBC instruction
Not listed
IBC special provisions
Not listed
Portable tank / bulk container codes
T14
Tank special provisions
TP2 TP7 TP13 TP27
EmS
F-E, S-C
Stowage and handling
Category C SW2 Category C SW2
Segregation
SGG1 SG5 SG8 SG36 SG49
Properties and observations · source text
Colourless to yellow flammable liquids with a pungent odour. Immiscible with water. React violently with water or steam, evolving hydrogen chloride, an irritating and corrosive gas apparent as white fumes. When involved in a fire, evolve toxic gas. In the presence of moisture, highly corrosive to most metals. Toxic if swallowed, by skin contact or by inhalation. Cause burns to skin, eyes and mucous membranes.

Packing and large packaging instructions

P010

Source pages and references
Referenced provisions:4.1.1 ↗4.1.3 ↗4.1.3.3 ↗4.1.3.6 ↗

Check original English pages and footnotes ↗ · official PDF 171–171

P010 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (see 4.1.3.3) Glass 1 L Drums Steel 40 L steel (1A1, 1A2) 400 kg plastics (1H1, 1H2) 400 kg plywood (1D) 400 kg fibre (1G) 400 kg Boxes steel (4A) 400 kg natural wood (4C1, 4C2) 400 kg plywood (4D) 400 kg reconstituted wood (4F) 400 kg fibreboard (4G) 400 kg expanded plastics (4H1) 60 kg solid plastics (4H2) 400 kg Single packagings Maximum capacity (see 4.1.3.3) Drums steel, non-removable head (1A1) 450 L Jerricans steel, non-removable head (3A1) 60 L Composite packagings plastics receptacle in steel drums (6HA1) 250 L Steel pressure receptacles provided that the general provisions of 4.1.3.6 are met.

IMDG Code 42-24 · English source text

Portable tank instructions

T14

Source pages and references
Referenced provisions:4.2.1 ↗6.7.2 ↗6.7.2.8 ↗6.7.2.6 ↗6.7.2.4 ↗6.7.2.8.3 ↗

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T14 · Selected instruction · IMDG 42-24
Portable tank instructionMinimum test pressure (bar)Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)Pressure relief provisionsa (see 6.7.2.8)Bottom opening provisionsb (see 6.7.2.6)
T1466 mmSee 6.7.2.8.3Not allowed

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages：264 · 42-24

Extracted source text
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 6 6 mm See 6.7.2.8.3 Not allowed

IMDG Code 42-24 · English source text

Tank special provisions

TP13

Source pages and references

Check original English pages and footnotes ↗ · official PDF 268–268

Self-contained breathing apparatus shall be provided when this substance is transported, unless no self-contained breathing apparatus, as required by SOLAS regulation II-2/19 (II-2/54), is on board.

IMDG Code 42-24 · English source text

TP27

Source pages and references
Referenced provisions:6.7.2.1 ↗

Check original English pages and footnotes ↗ · official PDF 268–268

A portable tank having a minimum test pressure of 4 bar may be used if it is shown that a test pressure of 4 bar or less is acceptable according to the test pressure definition in 6.7.2.1.

IMDG Code 42-24 · English source text

Special provisions

SP 274

Source pages and references
Referenced provisions:3.1.2.8.1 ↗

Check original English pages and footnotes ↗ · official PDF 761–761

For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include “N.O.S.” and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).

IMDG Code 42-24 · English source text

Stowage and handling codes

Segregation groups

Segregation codes

Labels and marks

Reference preview for Entry 1 · Packing group II. Confirm the cargo classification and any conditions in the special provisions.

Toxic substance 6.1
Toxic substance 6.1
Flammable liquid 3
Flammable liquid 3
Corrosive 8
Corrosive 8

⚠ The marine pollutant (MP) status must be determined from the actual consignment: this is a generic N.O.S. entry, and no "P" in column 4 of the Index does not exclude applicability (2.10.2.4). Per 2.10.2.5, if the consignment meets the marine pollutant criteria of 2.9.3 it must be carried as a marine pollutant with the MP mark.

Explore this class