IMDGSEEKDangerous goods at sea

IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN3406BARIUM PERCHLORATE SOLUTION

English proper shipping name · 2 DGL entries — select the applicable conditions below.

Choose the applicable DGL entry

Viewing entry 1

Match the proper shipping name, concentration or form, and packing group to your cargo. All requirements and the label preview below follow the selected entry.

The initial selection is a reference entry, not a classification decision for your cargo. “—” means the source field is not listed.

Class5.1
Packing groupII
EmSF-H, S-Q

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 2 DGL entries

Entry 1 · Packing group II

BARIUM PERCHLORATE SOLUTION

Class
5.1
Subsidiary risk / reference
6.1
Packing group
II
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
1 L
Excepted quantities
E2
Packing instruction
P504
Special provisions
Not listed
Special packing provision
Not listed
IBC instruction
IBC02
IBC special provisions
Not listed
Portable tank / bulk container codes
T4
Tank special provisions
TP1
EmS
F-H, S-Q
Stowage and handling
Category A Category A
Segregation
SGG13 SG38 SG49 SG62
Properties and observations · source text
Reacts vigorously with sulphuric acid. Reacts fiercely with cyanides when heated. May form explosive mixtures with combustible material, powdered metals or ammonium compounds. These mixtures are liable to ignite. When involved in a fire, may cause an explosion. Toxic if swallowed, by skin contact or by inhalation. Leakage and subsequent evaporation of the water from the solutions may present increased dangers as follows: .1 in contact with combustible material (particularly fibrous material such as jute, cotton or sisal) or sulphur, danger of spontaneous combustion, .2 in contact with ammonium compounds, powdered metals or oils, danger of explosion.

Entry 2 · Packing group III

BARIUM PERCHLORATE SOLUTION

Class
5.1
Subsidiary risk / reference
6.1
Packing group
III
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
5 L
Excepted quantities
E1
Packing instruction
P001
Special provisions
223
Special packing provision
Not listed
IBC instruction
IBC02
IBC special provisions
Not listed
Portable tank / bulk container codes
T4
Tank special provisions
TP1
EmS
F-H, S-Q
Stowage and handling
Category A Category A
Segregation
SGG13 SG38 SG49 SG62
Properties and observations · source text
See entry above.

Packing and large packaging instructions

P504

Source pages and references
Referenced provisions:4.1.1 ↗4.1.3 ↗

Check original English pages and footnotes ↗ · official PDF 210–210

P504 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (1) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Glass receptacles with a maximum capacity of 5 L (2) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G, 4A, 4B, 4N, 4C1, 75 kg 4C2, 4D, 4F, 4G, 4H2) Inner packagings: Plastics receptacles with a maximum capacity of 30 L (3) Outer packagings: (1G, 4F or 4G) 125 kg Inner packagings: Metal receptacles with a maximum capacity of 40 L (4) Outer packagings: (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 4A, 4B, 4N, 4C1, 4C2, 4D, 225 kg 4H2) Inner packagings: Metal receptacles with a maximum capacity of 40 L Single packagings Maximum capacity Drums steel, non-removable head (1A1) 250 L aluminium, non-removable head (1B1) 250 L metal, other than steel or aluminium, non-removable head (1N1) 250 L plastics, non-removable head (1H1) 250 L Jerricans steel, non-removable head (3A1) 60 L aluminium, non-removable head (3B1) 60 L plastics, non-removable head (3H1) 60 L Composite packagings Plastics receptacle in steel or aluminium drum (6HA1, 6HB1) 250 L Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1, 6HD1) 120 L Plastics receptacle in steel or aluminium crate or box or plastics receptacle in wood, 60 L plywood, fibreboard or solid plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Glass receptacle in steel, aluminium, fibre or plywood drum (6PA1, 6PB1, 6PD1 or 6PG1) 60 L or in a steel, aluminium, wood or fibreboard box or in wickerwork hamper (6PA2, 6PB2, 6PC, 6PG2 or 6PD2) or in expanded or solid plastics packaging (6PH1 or 6PH2) Special packing provisions: PP10 For UN Nos. 2014 and 3149, the packaging shall be vented. PP31 For UN 2626, packagings shall be hermetically sealed.

IMDG Code 42-24 · English source text

IBC instructions

IBC02

Source pages and references
Referenced provisions:4.1.1 ↗4.1.2 ↗4.1.3 ↗

Check original English pages and footnotes ↗ · official PDF 231–231

IBC02 The following IBCs are authorized, provided the general provisions of 4.1.1, 4.1.2 and 4.1.3 are met: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Special packing provisions: B5 For UN Nos. 1791, 2014, 2984 and 3149, IBCs shall be provided with a device to allow venting during transport. The inlet to the venting device shall be sited in the vapour space of the IBC under maximum filling conditions during transport. B8 The pure form of this substance shall not be transported in IBCs since it is known to have a vapour pressure of more than 110 kPa at 50C or 130 kPa at 55C. ° ° B15 For UN 2031 with more than 55% nitric acid, the permitted use of rigid plastics IBCs and of rigid plastics inner receptacles of composite IBCs shall be two years from their date of manufacture. B16 For UN 3375, IBCs of type 31A and 31N are not allowed without competent authority approval. B20 For UN Nos. 1716, 1717, 1736, 1737, 1738, 1742, 1743, 1755, 1764, 1768, 1776, 1778, 1782, 1789, 1790, 1796, 1826, 1830, 1832, 2031, 2308, 2353, 2513, 2584, 2796 and 2817 coming under PG II, IBCs shall be fitted with two shut-off devices.

IMDG Code 42-24 · English source text

Portable tank instructions

T4

Source pages and references
Referenced provisions:4.2.1 ↗6.7.2 ↗6.7.2.8 ↗6.7.2.6 ↗6.7.2.4 ↗6.7.2.4.2 ↗6.7.2.6.3 ↗

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T4 · Selected instruction · IMDG 42-24
Portable tank instructionMinimum test pressure (bar)Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)Pressure relief provisionsa (see 6.7.2.8)Bottom opening provisionsb (see 6.7.2.6)
T42.65See 6.7.2.4.2NormalSee 6.7.2.6.3

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages：264 · 42-24

Extracted source text
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 2.65 See 6.7.2.4.2 Normal See 6.7.2.6.3

IMDG Code 42-24 · English source text

Tank special provisions

Segregation groups

Segregation codes

Labels and marks

Reference preview for Entry 1 · Packing group II. Other entries may have different subsidiary risks or quantity limits; check their individual fields above. Confirm the cargo classification and any conditions in the special provisions.

Oxidizer 5.1
Oxidizer 5.1
Toxic substance 6.1
Toxic substance 6.1

This UN may be carried as a limited quantity (Code allocation 1 L); if this consignment is shipped as LQ, the LQ mark must be applied and chapter 3.4 complied with

This UN may be carried as an excepted quantity (code E2); if this consignment is shipped as EQ, the EQ mark must be applied and chapter 3.5 complied with

Explore this class