IMDGSEEKDangerous goods at sea

IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN1724ALLYLTRICHLOROSILANE, STABILIZED

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class8
Packing groupII
EmSF-E, S-C

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1 · Packing group II

ALLYLTRICHLOROSILANE, STABILIZED

Class
8
Subsidiary risk / reference
3
Packing group
II
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P010
Special provisions
386
Special packing provision
Not listed
IBC instruction
Not listed
IBC special provisions
Not listed
Portable tank / bulk container codes
T10
Tank special provisions
TP2 TP7 TP13
EmS
F-E, S-C
Stowage and handling
Category C SW1 SW2 Category C SW1 SW2
Segregation
SGG1 SG36 SG49
Properties and observations · source text
Colourless, flammable liquid with a pungent odour. Flashpoint: 35 C c.c. Reacts violently with water, evolving hydrogen ° chloride, an irritating and corrosive gas, apparent as white fumes. When involved in a fire, evolves toxic gases. In the presence of moisture, highly corrosive to most metals. Causes burns to skin, eyes and mucous membranes.

Packing and large packaging instructions

P010

Source pages and references
Referenced provisions:4.1.1 ↗4.1.3 ↗4.1.3.3 ↗4.1.3.6 ↗

Check original English pages and footnotes ↗ · official PDF 171–171

P010 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass (see 4.1.3.3) Glass 1 L Drums Steel 40 L steel (1A1, 1A2) 400 kg plastics (1H1, 1H2) 400 kg plywood (1D) 400 kg fibre (1G) 400 kg Boxes steel (4A) 400 kg natural wood (4C1, 4C2) 400 kg plywood (4D) 400 kg reconstituted wood (4F) 400 kg fibreboard (4G) 400 kg expanded plastics (4H1) 60 kg solid plastics (4H2) 400 kg Single packagings Maximum capacity (see 4.1.3.3) Drums steel, non-removable head (1A1) 450 L Jerricans steel, non-removable head (3A1) 60 L Composite packagings plastics receptacle in steel drums (6HA1) 250 L Steel pressure receptacles provided that the general provisions of 4.1.3.6 are met.

IMDG Code 42-24 · English source text

Portable tank instructions

T10

Source pages and references
Referenced provisions:4.2.1 ↗6.7.2 ↗6.7.2.8 ↗6.7.2.6 ↗6.7.2.4 ↗6.7.2.8.3 ↗

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T10 · Selected instruction · IMDG 42-24
Portable tank instructionMinimum test pressure (bar)Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)Pressure relief provisionsa (see 6.7.2.8)Bottom opening provisionsb (see 6.7.2.6)
T1046 mmSee 6.7.2.8.3Not allowed

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages：264 · 42-24

Extracted source text
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 4 6 mm See 6.7.2.8.3 Not allowed

IMDG Code 42-24 · English source text

Tank special provisions

TP13

Source pages and references

Check original English pages and footnotes ↗ · official PDF 268–268

Self-contained breathing apparatus shall be provided when this substance is transported, unless no self-contained breathing apparatus, as required by SOLAS regulation II-2/19 (II-2/54), is on board.

IMDG Code 42-24 · English source text

Special provisions

SP 386

Source pages and references
Referenced provisions:7.3.7 ↗

Check original English pages and footnotes ↗ · official PDF 774–775

When substances are stabilized by temperature control, the provisions of 7.3.7 apply. When chemical stabilization is employed, the person offering the packaging, IBC or tank for transport shall ensure that the level of stabilization is sufficient to prevent the substance in the packaging, IBC or tank from dangerous polymerization at a bulk mean temperature of 50°C, or, in the case of a portable tank, 45°C. Where chemical stabilization becomes ineffective at lower temperatures within the anticipated duration of transport, temperature control is required. In making this determination factors to be taken into consideration include, but are not limited to, the capacity and geometry of the packaging, IBC or tank and the effect of any insulation present, the temperature of the substance when offered for transport, the duration of the journey and the ambient temperature conditions typically encountered in the journey (considering also the season of year), the effectiveness and other properties of the stabilizer employed, applicable operational controls imposed by regulation (e.g. requirements to protect from sources of heat, including other cargo transported at a temperature above ambient) and any other relevant factors.

IMDG Code 42-24 · English source text

Stowage and handling codes

Segregation groups

Segregation codes

Labels and marks

Reference preview for Entry 1 · Packing group II. Confirm the cargo classification and any conditions in the special provisions.

Corrosive 8
Corrosive 8
Flammable liquid 3
Flammable liquid 3

Explore this class