IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN2813WATER-REACTIVE SOLID, N.O.S.

English proper shipping name · 3 DGL entries — select the applicable conditions below.

Choose the applicable DGL entry

Viewing entry 1

Match the proper shipping name, concentration or form, and packing group to your cargo. All requirements and the label preview below follow the selected entry.

The initial selection is a reference entry, not a classification decision for your cargo. “—” means the source field is not listed.

Class4.3
Packing groupI
EmSF-G, S-N

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 3 DGL entries

Entry 1 · Packing group I

WATER-REACTIVE SOLID, N.O.S.

Class
4.3
Subsidiary risk / reference
Not listed
Packing group
I
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P403
Special provisions
274
Special packing provision
PP31
IBC instruction
IBC99
IBC special provisions
Not listed
Portable tank / bulk container codes
T9
Tank special provisions
TP7 TP33
EmS
F-G, S-N
Stowage and handling
Category E SW2 H1 Category E SW2 H1
Segregation
SG26

Entry 2 · Packing group II

WATER-REACTIVE SOLID, N.O.S.

Class
4.3
Subsidiary risk / reference
Not listed
Packing group
II
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
500 g
Excepted quantities
E2
Packing instruction
P410
Special provisions
274
Special packing provision
PP31 PP40
IBC instruction
IBC07
IBC special provisions
B4 B21
Portable tank / bulk container codes
T3
Tank special provisions
TP33
EmS
F-G, S-N
Stowage and handling
Category E SW2 H1 Category E SW2 H1
Segregation
SG26

Entry 3 · Packing group III

WATER-REACTIVE SOLID, N.O.S.

Class
4.3
Subsidiary risk / reference
Not listed
Packing group
III
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
1 kg
Excepted quantities
E1
Packing instruction
P410
Special provisions
223 274
Special packing provision
PP31
IBC instruction
IBC08
IBC special provisions
B4
Portable tank / bulk container codes
T1
Tank special provisions
TP33
EmS
F-G, S-N
Stowage and handling
Category E SW2 H1 Category E SW2 H1
Segregation
SG26

Packing and large packaging instructions

P403

Source pages and references

Check original English pages and footnotes ↗ · official PDF 202–202

P403 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met. Combination packagings Maximum net mass Glass 2 kg Drums Plastic 15 kg steel (1A1, 1A2) 400 kg Metal 20 kg aluminium (1B1, 1B2) 400 kg other metal (1N1, 1N2) 400 kg Inner packagings shall be hermetically plastics (1H1, 1H2) 400 kg sealed (e.g. by taping or by threaded plywood (1D) 400 kg closures). fibre (1G) 400 kg Boxes steel (4A) 400 kg aluminium (4B) 400 kg other metal (4N) 400 kg natural wood (4C1) 250 kg natural wood with sift-proof walls 250 kg (4C2) plywood (4D) 250 kg reconstituted wood (4F) 125 kg fibreboard (4G) 125 kg expanded plastics (4H1) 60 kg solid plastics (4H2) 250 kg Jerricans steel (3A1, 3A2) 120 kg aluminium (3B1, 3B2) 120 kg plastics (3H1, 3H2) 120 kg Single packagings Drums steel (1A1, 1A2) 250 kg aluminium (1B1, 1B2) 250 kg metal other than steel or aluminium (1N1, 1N2) 250 kg plastics (1H1, 1H2) 250 kg Jerricans steel (3A1, 3A2) 120 kg aluminium (3B1, 3B2) 120 kg plastics (3H1, 3H2) 120 kg Composite packagings Plastics receptacle in steel or aluminium drum (6HA1 or 6HB1) 250 kg Plastics receptacle in fibre, plastics or plywood drum (6HG1, 6HH1 or 6HD1) 75 kg Plastics receptacle in steel, aluminium, wood, plywood, fibreboard or solid 75 kg plastics box (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2) Pressure receptacles, provided that the general provisions of 4.1.3.6 are met Special packing provisions: PP31 For UN Nos. 1360, 1397, 1402, 1404, 1407, 1409, 1410, 1413, 1414, 1415, 1418, 1419, 1423, 1426, 1427, 1428, 1432, 1433, 1436, 1714, 1870, 2010, 2011, 2012, 2013, 2257, 2463, 2806, 2813, 3131, 3132, 3134, 3135, 3208, 3209, 3395, 3396, 3397, 3401, 3402, 3403 and 3404, packagings shall be hermetically sealed. PP83 Deleted

IMDG Code 42-24 · English source text

Special packing provisions

PP31

Applies under P403

Source pages and references

Check original English pages and footnotes ↗ · official PDF 202–202

For UN Nos. 1360, 1397, 1402, 1404, 1407, 1409, 1410, 1413, 1414, 1415, 1418, 1419, 1423, 1426, 1427, 1428, 1432, 1433, 1436, 1714, 1870, 2010, 2011, 2012, 2013, 2257, 2463, 2806, 2813, 3131, 3132, 3134, 3135, 3208, 3209, 3395, 3396, 3397, 3401, 3402, 3403 and 3404, packagings shall be hermetically sealed.

IMDG Code 42-24 · English source text

IBC instructions

IBC99

Source pages and references

Check original English pages and footnotes ↗ · official PDF 232–232

IBC99 Only IBCs which are approved for these goods by the competent authority may be used (see 4.1.3.7). A copy of the competent authority approval shall accompany each consignment or the transport document shall include an indication that the packaging was approved by the competent authority.

IMDG Code 42-24 · English source text

Portable tank instructions

T9

Source pages and references

Check original English pages and footnotes ↗ · official PDF 260–267

These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells.

T9 · Selected instruction · IMDG 42-24
Portable tank instructionMinimum test pressure (bar)Minimum shell thickness (in mm – reference steel) (see 6.7.2.4)Pressure relief provisionsa (see 6.7.2.8)Bottom opening provisionsb (see 6.7.2.6)
T946 mmNormalNot allowed

a When the word “Normal” is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3. b When this column indicates “not allowed”, bottom openings are not permitted when the substance to be transported is a liquid (see 6.7.2.6.1). When the substance to be transported is a solid at all temperatures encountered under normal conditions of transport, bottom openings conforming to the provisions of 6.7.2.6.2 are authorized.

Source PDF pages:264 · 42-24

Extracted source text
S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 4 6 mm Normal Not allowed

IMDG Code 42-24 · English source text

Tank special provisions

TP33

Source pages and references

Check original English pages and footnotes ↗ · official PDF 267–269

The portable tank instruction assigned for this substance applies for granular and powdered solids and for solids which are filled and discharged at temperatures above their melting point and which are cooled and transported as a solid mass. For solids which are transported above their melting point, see 4.2.1.19.

IMDG Code 42-24 · English source text

Special provisions

SP 274

Source pages and references

Check original English pages and footnotes ↗ · official PDF 761–761

For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include “N.O.S.” and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).

IMDG Code 42-24 · English source text

Stowage and handling codes

Handling provisions

Segregation codes

SG26

Source pages and references

Check original English pages and footnotes ↗ · official PDF 493–493

In addition: from goods of classes 2.1 and 3 when stowed on deck of a containership a minimum distance of two container spaces athwartship shall be maintained, when stowed on ro-ro ships a distance of 6 m athwartship shall be maintained.

IMDG Code 42-24 · English source text

Labels and marks

Reference preview for Entry 1 · Packing group I. Other entries may have different subsidiary risks or quantity limits; check their individual fields above. Confirm the cargo classification and any conditions in the special provisions.

Dangerous when wet 4.3
Dangerous when wet 4.3

⚠ The marine pollutant (MP) status must be determined from the actual consignment: this is a generic N.O.S. entry, and no "P" in column 4 of the Index does not exclude applicability (2.10.2.4). Per 2.10.2.5, if the consignment meets the marine pollutant criteria of 2.9.3 it must be carried as a marine pollutant with the MP mark.

Explore this class