IMDG Code 42-24 · Dangerous Goods List

Open interactive lookup ↗

UN3360FIBRES, VEGETABLE, DRY

English proper shipping name · Check the cargo and applicable provisions before shipment.

Class4.1
Packing groupNot assigned in this entry
EmSF-A, S-I

Dangerous Goods List entries

The comparison below lists all entries. Expanded provisions and the label preview on this page apply to Entry 1.

Compare all 1 DGL entry

Entry 1

FIBRES, VEGETABLE, DRY

Class
4.1
Subsidiary risk / reference
Not listed
Packing group
Not assigned in this entry
Marine pollutant entry
Not listed; check the cargo classification
Limited quantities
0
Excepted quantities
E0
Packing instruction
P003
Special provisions
29 123 299 973
Special packing provision
PP19
IBC instruction
Not listed
IBC special provisions
Not listed
Portable tank / bulk container codes
Not listed
Tank special provisions
Not listed
EmS
F-A, S-I
Stowage and handling
Category A Category A
Segregation
Not listed in this DGL field
Properties and observations · source text
Ignite readily. Consignments of cotton, dry having a density not less than 360 kg/m3, flax, dry having a density not less than 400 kg/m3, sisal, dry having a density not less than 360 kg/m3 (ISO Standard 8115 (1986)) and tampico fibre, dry having a density not less than 360 kg/m³ are not subject to the provisions of this Code when carried in closed cargo transport units.

Packing and large packaging instructions

P003

Source pages and references

Check original English pages and footnotes ↗ · official PDF 169–169

P003 Dangerous goods shall be placed in suitable outer packagings. The packagings shall meet the provisions of 4.1.1.1, 4.1.1.2, 4.1.1.4, 4.1.1.8 and 4.1.3 and be so designed that they meet the construction provisions of 6.1.4. Outer packagings constructed of suitable material, and of adequate strength and design in relation to the packaging capacity and its intended use, shall be used. Where this packing instruction is used for the transport of articles or inner packagings of combination packagings, the packaging shall be designed and constructed to prevent inadvertent discharge of articles during normal conditions of transport. Special packing provisions: PP16 For UN 2800, batteries shall be protected from short circuit within the packagings. PP17 For UN 2037, packages shall not exceed 55 kg net mass for fibreboard packagings or 125 kg net mass for other packagings. PP18 For UN 1845, packagings shall be designed and constructed to permit the release of carbon dioxide gas to prevent a build-up of pressure that could rupture the packagings. PP19 For UN Nos. 1327, 1364, 1365, 1856 and 3360, transport as bales is authorized. PP20 For UN Nos. 1363, 1386, 1408 and 2793, any sift-proof, tearproof receptacle may be used. PP32 UN Nos. 2857 and 3358 and robust articles consigned under UN 3164 may be transported unpackaged, in crates or in appropriate overpacks. Note: The packagings authorized may exceed a net mass of 400 kg (see 4.1.3.3). PP90 For UN Nos. 3506 and 3554, sealed inner liners or bags of strong leakproof and puncture resistant material impervious to mercury or gallium, as appropriate, which will prevent escape of the substance from the package irrespective of the position of the package shall be used. PP91 For UN 1044, large fire extinguishers may also be transported unpackaged provided that the requirements of 4.1.3.8.1.1 to 4.1.3.8.1.5 are met, the valves are protected by one of the methods in accordance with 4.1.6.1.8.1 to 4.1.6.1.8.4 and other equipment mounted on the fire extinguisher is protected to prevent accidental activation. For the purpose of this special packing provision, “large fire extinguishers” means fire extinguishers as described in subparagraphs.3 to.5 of special provision 225 of chapter 3.3. PP96 For UN 2037 waste gas cartridges transported in accordance with special provision 327, the packagings shall be adequately ventilated to prevent the creation of dangerous atmospheres and the build-up of pressure. PP100 For UN Nos. 1408 and 2793 flexible, fibreboard or wooden packagings shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner.

IMDG Code 42-24 · English source text

Special packing provisions

PP19

Applies under P003

Source pages and references

Check original English pages and footnotes ↗ · official PDF 169–169

For UN Nos. 1327, 1364, 1365, 1856 and 3360, transport as bales is authorized.

IMDG Code 42-24 · English source text

Special provisions

SP 29

Source pages and references

Check original English pages and footnotes ↗ · official PDF 753–753

The packages, including bales, are exempt from labelling provided that they are marked with the appropriate class (e.g. “class 4.2”).

IMDG Code 42-24 · English source text

SP 299

Source pages and references

Check original English pages and footnotes ↗ · official PDF 763–763

Consignments of:.1 Cotton, dry having a density not less than 360 kg/m3;.2 Flax, dry having a density not less than 400 kg/m3;.3 Sisal, dry having a density not less than 360 kg/m3; and.4 Tampico fibre, dry having a density not less than 360 kg/m3, according to ISO 8115:1986, are not subject to the provisions of this Code when transported in closed cargo transport units.

IMDG Code 42-24 · English source text

SP 973

Source pages and references

Check original English pages and footnotes ↗ · official PDF 783–783

Packages, with the exception of bales, shall also display the proper shipping name and the UN number of the substance that they contain in accordance with 5.2.1. In any case, the packages, including bales, are exempt from class marking provided that they are loaded in a cargo transport unit and that they contain goods to which only one UN number has been assigned. The cargo transport units in which the packages, including bales, are loaded shall display any relevant labels, placards and marks in accordance with chapter 5.3.

IMDG Code 42-24 · English source text

Labels and marks

Reference preview for Entry 1. Confirm the cargo classification and any conditions in the special provisions.

Flammable solid 4.1
Flammable solid 4.1

Explore this class